 |
|
£265.00 |
The bell tent is a design classic that has probably sheltered more heads than any other tent in history. The Canvas and cast traditional bell tent is sewn from heavy weight 320g waterproofed canvas and incorporates robust adonised poles,unbendable pegs, and traditional wooden slider/guy lines . The canvas and cast bell tent is both extremely durable as well as beautiful to behold. Manufactured to the highest specifications. With a seperate heavy grey PVC groundsheet you have the option to roll up the sides during the day and the bell tent seems to float on the breeze.
This single pole tent is made from a high quality heavyweight 320mg.waterproofed and flame retardent off white canvas. There are 3 half round windows with built in mosquito nets and zipper closures. The doorway is supported by a sprung loaded 4 section 'snap-together' A frame door pole. The tent comes in its own canvas carry bag and has an integral Canvas and Cast designed heat resistant flue panel sewn into the side. When not in use there is a zipperred covering panel configured in the same way as the windows. Dont confuse this tent with others that possess poor quality plastic guy line attachments or that need 'add-on flue flashings. The Canvas and Cast Bell tent is better designed , and is handcrafted to a superior quality and finish, than any other traditionally handcrafted canvas Bell tent on the UK market.
To accompany the bell tent, Canvas and Cast offer the best bell tent stove on the market , the 'Pipsqueak stove'. The stove comes complete with hearth plate and tools. Also available is a full tailor made bell tent flue flue kit and stove stand . This bell tent is a perfect light weight alternative to a yurt . It can be assembled in under twenty minutes. . The tent comes with full instructions and canvas carry bag.
Diameter 4 METRES
Fitting stoves into bell tents
All woodburning stoves should be installed in accordance with part J of the current building regulations
The Canvas and Cast flue systems are fabricated from Grade 1 durable and rust proofed stainless steel . Each section of flue pipe fits neatly together without the need for locking bands. Its superior quality means it will never rust or get chipped like some cheaper enamelled flue pipe. Each flue system comes complete with full instructions and everything you need to fit a stove into a bell tent in accordance with current regulations. Our flue kits have been especially designed with the current regulations and safety in mind. Much time has been given to safety in addition to ease of fitting and function.
Unless the flue exit clears the top of the tent we recommend wherever possible to exit the flue pipe through the side of the structure or as close to the roof edge as possible. This particularly case with Bell tents. Yurts with much shallower pitched roofs are much more suited to roof exit of flue as the safe height of flue can be achieved more quickly by adding less height to the flue system.
We strongly recommend that when considering operating a solid fuel stove inside a tent you try where ever possible to use the recommended and required safe distances of flue pipe from flammable materials contained in Part J of the current UK Building Regulations.
KEY POINTS TO CONSIDER WHEN FITTING
When in operation ensure stove is no more than 150mm adjacent to canvas.
Provide adequate steel plate or glycroc/isokern shielding if no rear heat shield is provided.
Ensure the top of chimney is no closer than 2.2M to the canvas of tent.
If exiting through roof ensure top of flue is high enough not to cause smoke damage and future acid degradation of the canvas.
The flue system must be supported in three positions one of which can be the location of flue system to stove. The flue system must then be securely clamped in two other places to ensure safe and stable operation regardless of any movement in the tent. For bell tents especially a rubber flashing for example placed for the flue exit cannot be considered as an anchor point as it not independent of the tents movement caused by adverse weather conditions.
Where possible shield stove from close contact with any flammable material and site on a hearth with 200mm clearance to front of stove firebox.
Select a tent that has a flame/heat resistant panel incorporated as part of the tent where the flue flashing is to be located.
If leaving stove to burn unattended overnight please ensure you provide adequate ventilation by leaving window or vent open.
As a qualified HETAS solid fuel engineer with over 15 years experience I have designed flue kit to be as safe as possible. Great care should be taken when operating any solid fuel appliance inside any canvas structure.
© Copyright Canvas & Cast
This design uses valid CSS & HTML
SiteWizard.co.uk Web Site Design Company - eCommerce Software Shopping Cart Solutions
